NFG Connect — share a USB device

Install once

Run the full Customer installer on the computer with the adapter and the Technician installer on the technician computer. Missing USB prerequisites install automatically after Windows administrator approval. Restart if requested. The adapter manufacturer's own driver may also be required. The Install USB driver button can repair a missing prerequisite after an app update using the exact verified vendor package.

The server owner must apply the separate NFG relay v0.19 update for the 60-minute connection window. Closing either app, Stop access, Windows lock or loss of the approved support session ends USB access sooner.

Select and connect

  1. Customer opens NFG Customer, shares their customer ID, and approves the technician's support request.
  2. Customer opens USB connection, chooses Refresh my devices, selects the adapter by name and clicks Share selected USB. The USB port is filled in automatically; nobody needs to type a BUSID.
  3. Customer confirms the named device once in NFG. Sharing starts automatically after Windows administrator approval, if Windows requests it. No command window or typed confirmation is needed. NFG checks the selected device identity again before sharing. A device already shared outside NFG is left unchanged. If NFG reports a conflicting USB sharing driver, enable Use compatibility driver for this device and review its temporary driver change in the device approval. STOP removes the share and requests the normal driver again.
  4. Technician opens USB connection. The customer's selected device appears by name. Select it and click Connect selected USB. NFG attaches it automatically after Windows administrator approval, if requested.
  5. NFG passes that device to the technician PC. Check Windows Device Manager and the adapter manufacturer's diagnostic utility with a read-only bench test.
  6. Watch the remaining time in NFG. Approval lasts up to 60 minutes from customer approval. STOP USB SESSION ends it sooner. NFG shows connection and cleanup results in the app; a new session needs fresh customer approval.

Only the selected device is offered to the approved technician. The full Windows device inventory is not uploaded. While attached, the customer PC temporarily loses local use of that device.

Connection and recovery

NFG carries USB traffic through authenticated TLS connections. Customer USB/IP port 3240 stays private to the local bridge; do not forward it publicly. Technician connections use separate local ports so other customer workspaces remain independent.

NFG records the new share GUID for targeted cleanup and displays driver failures in the USB connection window. Driver failure or power loss may require the saved recovery instructions. A listed device or successful tunnel is not proof of adapter compatibility or vehicle communication; each adapter, manufacturer driver and diagnostic program still requires physical testing. ECU programming remains unqualified.